Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Panel Replacement Cost in Lakewood?
Panel replacement in Lakewood typically costs $250 – $500, depending on how many sections are damaged and whether the panel matches a current profile or needs to be ordered. That range is an estimate for the panel work itself. The written estimate you get before we start sets the final price, and that estimate is free.
Most Lakewood homes built in the 1960s through 1990s have steel doors with stamped panel profiles, which keeps single-panel replacement on the lower end of that range. Larger doors, insulated panels, and windows cut into a section push toward the top. We work on your brand, whichever it is: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, or Raynor.
Here’s the short version:
- Typical single-panel swap: $250 – $500
- What it covers: the panel, the labor, and re-hanging or adjusting the section so the door runs level
- What it doesn’t cover: springs, cables, tracks, or opener work, priced separately
- Estimates: free, with the price written down before any work begins
Panel Replacement Cost Breakdown (2026)
Every panel job is different, so we quote per job rather than per unit. The table below shows typical estimated ranges for panel replacement and the nearby repairs that often come up during the same visit. These are ranges, not quotes; the written estimate is the number that counts.
| Work | Typical Estimated Range in Lakewood |
|---|---|
| Single panel replacement (one section) | $250 – $500 |
| Panel replacement with matching profile order | $250 – $500, at the upper end of the range |
| Garage door repair (general, mixed issues) | $150 – $600 |
| Spring repair (one spring) | $180 – $340 |
| Cable repair | $130 – $250 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| New door installation | $700 – $2200 |
A matched pair of springs is usually replaced together, so a pair runs about twice the one-spring range. If a spring, cable, or track problem caused the panel damage, you may be looking at two or three line items rather than one. That’s why we start with a diagnostic rather than assuming the panel is the whole story.
What pushes panel pricing toward the top of the $250 – $500 range is insulation, windows in the section, and color matching on a discontinued profile. A plain stamped steel panel in a standard color is the cheapest version of this job. An insulated panel with a window insert is the most expensive, and a panel that has to be ordered in rather than swapped from what’s readily available sits in between.
What Affects Panel Replacement Pricing in Lakewood
Panel pricing isn’t one number. It moves with a handful of practical factors, and some of them are specific to how homes here are built.
- Number of sections involved. One damaged panel is a single replacement. Two or three adjacent panels that took a hit from a car bumper, a ladder, or a basketball are separate line items, which is the biggest lever on the final bill.
- Panel profile and color match. Lakewood has a lot of older steel doors with stamped profiles that have since been discontinued. A universal panel can often be fitted, but a true match may need to be ordered, which moves the job toward the $500 end.
- Insulation and windows. Non-insulated panels are the least expensive. Insulated or window-bearing sections cost more because there’s more material and more fitting work.
- Whether it’s a door problem or a system problem. A panel that’s dented is cosmetic. A panel that’s bent because a track is out of line or a cable failed is a system problem, and the track or cable work gets added to the panel cost.
- Cold-weather durometer on older vinyl and steel. Denver-metro winters swing from single digits to the sixties in the same week, and that freeze-thaw cycle hardens older steel and vinyl over time. Panels that are already brittle near the hinges sometimes crack during removal, so we inspect before we commit to a panel-only job.
- Ease of access and door height. A standard seven or eight foot door is straightforward. A taller door, or a door with a tight approach, adds the time a technician needs to support the section while it’s off the track.
Panel replacement is worth describing honestly because it’s frequently the cheapest way out of a bad-looking door. A single dented section doesn’t mean a whole new door. If you’re weighing a panel swap against a full replacement, our Linden Garage Door Repair team can walk you through both numbers side by side and tell you which one actually makes sense for the door you have.
How to Save on Panel Replacement
There’s no trick to spending less on this job. The savings come from deciding early, matching the panel to the door rather than the door to the panel, and catching small problems before they turn into big ones.
- Get the panel fixed before the adjacent ones follow. A bent panel that rubs on the track wears the section beside it and the rollers underneath. Fixing one section early is cheaper than fixing three later.
- Ask whether a universal profile fits. On many stamped steel doors, a universal replacement panel works and costs less than a factory-matched one. Ask specifically whether yours qualifies before agreeing to an ordered panel.
- Skip insulation if the door isn’t insulated. If the rest of the door is non-insulated steel, an insulated panel only makes the odd section heavier and doesn’t buy you much. Match what’s there.
- Bundle related repairs into one visit. If the rollers are worn or a track is out of line, handling it during the panel replacement avoids a second trip and a second estimate. Call (855) 554-3769 and describe everything you’re seeing; the estimate covers the whole visit.
- Ask for the written estimate before work starts. The estimate is free, and it sets the final price. There’s no service-call fee to get one.
If the damage is actually in the opener rather than the door, our Lakewood page explains how we diagnose the motor separately from the door itself, so you’re not paying for panel work when the real issue is a stripped gear or a failing logic board.
FAQs – Panel Replacement Cost
How much does it cost to replace a garage door panel in Lakewood?
Panel replacement in Lakewood typically runs $250 – $500 for a single section, with insulated or window-bearing panels at the upper end of that range. The written estimate sets the final price. Call (855) 554-3769 for a free estimate.
Is it cheaper to replace one panel or the whole door?
Replacing one panel is almost always cheaper than a full door. A single panel at $250 – $500 beats a new door at $700 – $2200 by a wide margin. The whole door only makes sense when the damage spans most of the sections or the structure is failing. Call (855) 554-3769 and we’ll tell you honestly which side of that line you’re on.
Why did my panel cost more than the low end of the range?
Panels land above $250 when the section is insulated, has a window, needs an ordered replacement, or the door also needs track or cable work to run straight. The written estimate breaks out each line item so you can see exactly where the cost sits. Call (855) 554-3769 for an itemized quote.
Does panel replacement come with any warranty or guarantee?
Warranty terms depend on the panel manufacturer and the specific job, so we confirm the details in writing with your estimate rather than making a blanket promise. Ask when you call and we’ll spell out what applies to your door. Call (855) 554-3769 to get that in writing before work starts.
Can you replace a panel the same day I call?
Often yes, if the panel is one we can source from common stock. Ordered or discontinued profiles take longer. We answer 24/7, and dispatch runs from 7am to 7pm, Sunday through Friday. Call (855) 554-3769 and we’ll tell you what your door needs.
What Happens When You Call
You describe what’s damaged and which sections are affected. We ask about the door’s brand, the panel profile, and whether the door still opens and closes under power. Then we quote the panel replacement, note any related repairs that show up, and put the whole thing in writing. Springs hold enormous tension and cables are under load every second the door is down, so we never talk anyone through a panel swap as a do-it-yourself project. A trained technician is the right call for anything involving the torsion system, the cables, or a door off its track.
Our technicians have up to 12 years of experience across LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor equipment. From a broken spring to a full new door, we handle the panel, the opener diagnosis, and the installation in one place, so there’s no handoff to a second contractor halfway through.
Ready for a Straight Answer on Your Door?
Call (855) 554-3769 for a free estimate on your panel replacement. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. You’ll get a plain number, a written estimate, and the right fix rather than the easiest upsell.
Pricing reflects the Lakewood market as of 2026. Linden Garage Door Repair offers free estimates – call (855) 554-3769.
Written by the team at Linden Garage Door Repair.
What Our Customers Say
"Good repair, reasonable money. The door still has a slight shudder about a foot from the top that he said is the track being slightly out of true on an old frame and would cost real money to fix properly. Fair enough, but I'd hoped it would be perfect."
- Rohan Reddy"Opener kept reversing halfway down. Turned out to be the safety sensors knocked out of alignment by a bicycle. He straightened them, wouldn't charge me for it, and just asked me to keep them in mind if I need real work later."
- Javier Hernandez"Replaced the bottom panel after I backed into it. Color match is close enough that you have to know to look for it."
- Norma Torres