Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Lakewood?
Spring replacement in Lakewood typically costs $180 to $340 for a single torsion spring, including the spring and the labor to install it. A matched pair is usually replaced together, so expect about twice that range for both sides. These are estimated ranges for the Lakewood market, and the written estimate we give you after looking at the door sets the final price.
That range holds whether the door is stuck open or already down on the floor of the garage. The job itself is short: shut the door, measure the spring, match it, and swap it. What makes it feel urgent is that the door won’t move until it’s done, and a spring that’s let go won’t fix itself by waiting. Call (855) 554-3769 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm.
Key Takeaways
- A single spring runs $180 to $340 in Lakewood. A matched pair is about double that.
- Most doors here carry two springs, and replacing both at once almost always makes sense.
- Same-day spring replacement is often possible when you call in the morning.
- The estimate is free, and the written quote is the price.
- We work on doors and openers from LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor.
Spring Replacement Cost Breakdown (2026)
Here’s how the pieces of a spring job break down in Lakewood for 2026. The ranges below are typical estimates, not a quote. Every door gets its own written estimate, and that’s the number that counts.
| Line item | Typical estimated range |
|---|---|
| Spring repair or replacement (one spring) | $180 – $340 |
| Matched pair of springs (both replaced) | About twice the single-spring range |
| Cable repair (often needed if a cable snapped with the spring) | $130 – $250 |
| Roller replacement (if the rollers went with the spring) | $110 – $220 |
| Track realignment (if the door jumped the track) | $120 – $240 |
| Panel replacement (if a panel bent when the door dropped) | $250 – $500 |
| Opener repair (if the opener took the strain) | $120 – $320 |
What pushes a spring job toward the top of the range? A door built for a heavier load takes a sturdier spring, and a high-lift or oversized door can carry springs that cost more to source. I’ll get one point out of the way: torque, not repair, is what moves the needle. Fiddling with a wound spring isn’t a way to save money (see the safety note below). On the low end, if the torsion bar is sound and the cables are intact, replacing one spring is a clean, quick job and sits near $180. Separate problems always drive the price up faster than the spring itself.
Replacing a pair of springs is the standard recommendation when a door carries two, and here’s why. Springs are matched sets, and when one lets go the other has usually cycled the same number of times and is close behind it. Doing both now beats paying twice. It’s not an upsell, it’s a way to keep the door working without a second callback a month later.
What Affects Spring Replacement Pricing in Lakewood
- One spring or two. Most residential doors here are built with a pair of torsion springs, and the price per spring holds steady. If your door has a single spring, you’re paying for one; if it has two, plan on roughly double.
- Torsion versus extension springs. Torsion springs mount on the bar above the door. Older doors and some lighter door setups use extension springs that run along the track, and the hardware differs, which is one reason we confirm the type before quoting.
- Door weight and size. A two-car door weighs a lot more than a single-car door, and it needs a heavier-rated spring. Lakewood’s mix of older single-car garages and newer full-width doors means the range covers both ends.
- What else the failure took with it. When a spring snaps, the door can come down hard. Sometimes a cable or a roller takes the strain, and sometimes a panel bends. Any of those add a separate line item to the repair, so we check the whole door, not just the broken spring.
- Opener wear from the broken spring. A door that’s been pushed by the opener instead of the spring puts strain on the motor. If the opener dragged the door up after the spring let go, that gets checked on its own. We deal with the opener as a separate system rather than lumping it in. If it needs a fix, opener repair is a different line item.
- Spring life and local conditions. Springs are rated in cycles, which is how many open-and-close movements they’ll take. A door that cycles a dozen times a day wears out faster than one used a few times a day, so households with heavy daily use here may see a shorter lifespan between replacements. You can’t change the cycles the spring already used, but knowing the rating helps you plan.
None of that changes the core number you came here for. A single spring is still mostly a $180 to $340 job in Lakewood, and the written estimate is what locks it in.
When a Spring Needs Replacing
Most homeowners don’t need to be told a spring is gone. There’s a bang like a gunshot, and the door won’t lift. When that happens, the door is heavy and stuck, and forcing it by hand or with the opener strains everything else on it. Leave it closed and call. A snapped spring should always get a professional, and it’s the one part of a garage door we’d never suggest a homeowner touch.
Sometimes a spring fails quietly. The signs are worth knowing because a worn spring is an easy thing to fix before it breaks:
- The door feels much heavier to lift by hand than it used to.
- It rises a foot or so and then stops or reverses, even with the opener pushing.
- The opener has to work harder, or you hear a strain in the motor.
- A visible gap in the coil of the spring on the center bar above the door.
If you spot any of that, a quick inspection is worth the call. Catching a tired spring early saves a bigger repair and keeps the door moving the way it should. From a broken spring to a full new door, we handle the whole job through one point of contact, so you’re not tracking down a second contractor if the door needs more.
How Much Does a Broken Spring Repair Cost in Lakewood?
A broken spring repair in Lakewood is the same $180 to $340 range for one spring, because replacement is the repair. There’s no repair that restores a snapped spring. The job is to swap it out for one matched to your door.
One detail worth mentioning: we don’t try to talk you into the more expensive option when the cheaper one is right. If the other spring on the door is sound and recent, replacing just the broken one is a fair call. If both are worn, we’ll tell you, and you decide. The written quote is the price either way.
How to Save on Spring Replacement
- Get the estimate in writing before any work starts. A free written estimate is the clearest way to know what a job will cost. We don’t charge for it, and the number doesn’t change once the work begins unless you approve something extra.
- Replace a worn pair together rather than one at a time. It sounds like more money up front. It isn’t. Paying for one spring now and another in a few months usually costs more in total than doing both.
- Don’t wait for the bang. A worn spring fixed before it snaps avoids the door-dropping cascade that bends panels and strains cables and openers. Those are the line items that turn a spring job into a bigger bill.
- Check the whole door at the same visit. If a roller or cable is past its prime, replacing it during the spring job saves a second service call later. Ask your technicians to look while they’re already there.
- Ask about the spring’s cycle rating. When the option’s available, a higher-cycle spring may last longer for a door that gets used heavily. That’s a judgment call for you and your technician, but it’s worth raising.
Springs are straightforward work when the door’s otherwise sound, and knowing what drives the cost helps you make the call without being pushed. Call (855) 554-3769 for a free estimate. We answer 24/7.
What Does Spring Replacement Involve?
Here’s how a typical job goes, without the do-it-yourself framing, because the wound spring under tension is the most dangerous part of any garage door. We don’t hand out steps for it, and we’d suggest you don’t attempt it. What we will do is explain what the technician works through, so you know what you’re paying for.
First, the technician gets the door down and the tension safely off the bar. Then the spring gets measured against the door’s weight and the bar’s specs and matched to the right rating. The new spring goes on, tension is set by the book, and the door is run up and down to check that it sits at the right height and holds at the halfway point. If the break took a cable or a roller with it, that gets handled too, and the whole door is tested before the technician leaves. The estimate you got is the price for the completed, tested job.
A quick word on safety. Torsion springs hold a lot of stored energy, and a spring that’s been damaged or loosened without care can cause serious injury. That’s why the trade treats it as a trained-professional job, not a homeowner project. We’d say the same thing to a neighbor, and it’s why we don’t miss the danger in the estimate.
Can We Replace Your Springs the Same Day?
Same-day spring replacement is often possible in Lakewood when you call in the morning and your door takes a common spring size. The work itself is quick once the right spring is on hand. Call and we’ll tell you what’s realistic.
Call (855) 554-3769. We answer 24/7, and we book repair work Sunday through Friday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. We’re closed on Saturdays.
Springs vary by door, so a less common size or a door that needs extra work may take a return trip, and we’ll tell you up front if that’s the case rather than leave you guessing.
Why Choose Us for Your Spring Replacement
We’re brand-agnostic in how we approach a spring job. That means a recommendation comes from what the door actually needs, not from a single manufacturer’s parts catalog. We’re certified to work on eight major garage door and opener brands, including LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor, so a door with any of those names on it is one we know. Our technicians have up to 12 years of experience, and each job goes from your first call through the finished repair with one point of contact. No subcontracting, no handoffs. If the opener’s involved, we diagnose it as its own system rather than treating it as an afterthought to the spring.
That name of ours, Linden, is meant to read like a neighborhood business rather than a franchise, with the accountability that comes from being reachable and local. If you’re in one of Lakewood’s established neighborhoods or the newer subdivisions on the west side, you’re getting a straight answer about what the job takes and what it costs, not the biggest repair we can talk you into.
Frequently Asked Questions About Spring Replacement Cost in Lakewood
How much does garage door spring replacement cost in Lakewood?
Spring replacement in Lakewood typically costs $180 to $340 for a single spring, and a matched pair runs about twice that. The written estimate sets the final price, and it’s free. Call (855) 554-3769 for an exact quote.
Is it cheaper to repair or replace a garage door spring?
A snapped spring can’t be repaired, only replaced, so the comparison is between replacing one spring ($180 to $340) and replacing the pair (about double). Doing the pair is usually cheaper in the long run than paying twice. Call (855) 554-3769 for a quote on your door.
Why is a pair of springs more than a single spring?
Because a pair is two springs, each rated for your door’s weight, and the labor covers both. Replacing one spring runs $180 to $340, so a pair is roughly $360 to $680. Call (855) 554-3769 to find out which your door needs.
Do I need to replace both springs if only one broke?
Usually, yes. Springs wear at the same rate, so the second is typically close to failing when the first goes. It’s often cheaper to replace both now than to pay for a second service call later. Call (855) 554-3769 to talk through your door.
Does a broken spring always need a professional?
Yes. A torsion spring holds enough stored energy to cause serious injury when it’s under load, and that’s why spring work is a trained-professional job, not a homeowner repair. Call (855) 554-3769 for a free estimate and a safe fix.
Get a Free Spring Replacement Estimate
If your door won’t lift or you’ve heard the bang, you don’t have to guess what it’ll cost. We’ll look at the door, tell you whether it’s one spring or two, and give you a written estimate before anything starts. The estimate is free, and the price on the paper is the price. Call (855) 554-3769. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturdays.
Reach out to our team at Linden Garage Door Repair for a straight answer on your garage door. You can also see what we offer around Lakewood and the neighborhoods we cover.
Pricing reflects the Lakewood market as of 2026. Linden Garage Door Repair offers free estimates – call (855) 554-3769.
Written by the team at Linden Garage Door Repair.
What Our Customers Say
"Good repair, reasonable money. The door still has a slight shudder about a foot from the top that he said is the track being slightly out of true on an old frame and would cost real money to fix properly. Fair enough, but I'd hoped it would be perfect."
- Rohan Reddy"Opener kept reversing halfway down. Turned out to be the safety sensors knocked out of alignment by a bicycle. He straightened them, wouldn't charge me for it, and just asked me to keep them in mind if I need real work later."
- Javier Hernandez"Replaced the bottom panel after I backed into it. Color match is close enough that you have to know to look for it."
- Norma Torres